Sentence examples for penetration parameter from inspiring English sources

A solid bridge force equation for high-viscosity materials was proposed based on a penetration parameter.

As a result, it is possible to conclude that weld penetration parameter is a main factor controlling severity of SCC for weld.

The weld penetration parameter is defined as L =, left( {H - p} right)/2, (4 where H is the web thickness and the range of L is 5 13 mm.

Despite the gigantic scale of the process, it is believed to be amenable to microwave treatment because, much like in the conventional process, the reactors required would be relatively small in diameter and, as such, do not represent a significant challenge with respect to the microwave penetration parameter.

As can be seen from Fig. 13, when the weld penetration parameter increase from 6 to 13 mm, the SCC of each component firstly reduces and then increases, and the variation of SCC of web, flange and weld is 6.7, 5.5 and 12.2%, respectively.

a Gap width, b gap length for Type I, c gap length for Type 2 Open image in new window Fig. 12 Relationship between the SCC and plate gap width Open image in new window Fig. 13 Relationship between the SCC and weld penetration parameter Open image in new window Fig. 14 Relationship between the SCC and initial geometric imperfection.

Figures 6 14 illustrate the SCC variation affected by plate thickness, weld size, cope-hole radius, filler plate thickness, plate gap with, weld penetration parameters and initial geometric imperfection, respectively.

Results of experimental studies on penetration parameters determination of quick-hardening liquid into soil porous material on various physical models: slot-hole, flat, one-dimensional and fragmentary are given.

The use of single-chain perdeuterated N-palmitoyl-D erythro-sphingosine (CER [NS]-d31) or N-palmitoyl-D erythro-phytosphingosine (CER [NP]-d31) permits us to spectroscopically distinguish the exogenous agents from the endogenous SC lipids without affecting penetration parameters.

The laser penetration welding parameters are as follows: power 1200 W, welding speed 1200 mm/min, defocusing amount −1 mm, shield gas flow 0.6 L/min, and the parameters for superplastic forming are as follows: temperature Tf = 950 °C, pressure Pf = 4.2 MPa, time tf = 130 min.

The issues of Pharmacokinetics, biodistribution and immunogenicity and tumor penetration: these parameters are key issues in current phage therapy studies [ 56, 57].