Sentence examples for peeling temperature from inspiring English sources

Minimum peeling temperature and cooking value were theoretically estimated.

The most important factors affecting the bonding strength of plywood are wood species, adhesive type, wood density, veneer peeling temperature, veneer drying temperature and relative moisture content.

Contact angles of PF resin drops on veneers were similar for each peeling temperature while the contact angles of UF glue resin on veneers produced from the logs with 32 °C were lower than those of produced from the logs with 52 °C.

Bond failure was categorized by skin peeling for temperatures less than 300 °C, yet increased with higher temperatures to much higher concrete thicknesses.

Let cool to room temperature before peeling off paper.

Filters were dried at room temperature by peeling the filter from moistened paper after incubation and placing it directly on the surface of an empty fiberglass tray.

The stability of the Cr-coated layer deposited was maintained without peeling after a high-temperature oxidation test, and a Cr2O3 thin oxide layer was observed on the Cr coating layer.

The effect of nine extraction variables was identified as relevant in previous phenolics extraction studies, because solvent solid ratio, time, pH, peeling cut depth, particle size, temperature, solvent, sample amount and agitation were combined in a 12 run Placket Burman design to screen for key factors.

Open image in new window Fig. 4 Energy gap of C-Dots from mangosteen peel in temperature 200, 250 and 300 °C Open image in new window Fig. 5 TEM images of C-Dots which are synthesized at temperature : a 200 °C, b 250 °C and c 300 °C.

The effect of peel rate and temperature on peel toughness and delamination failure mode of coextruded microlayer sheet consisting of alternating layers of polycarbonate (PC) and poly styrene-co-acrylonitrile) (SAN) was studied with the T-poly styrene-co-acrylonitrile

When I first met Mingma Chhiri, the skin on his face was flushed and peeling from windburn and exposure to subzero temperatures.