Sentence examples for peak quantum efficiency from inspiring English sources

Through the theoretical analysis and simulation, the peak quantum efficiency of the photodetector is improved.

An integrated device with a peak quantum efficiency of 58.42% around 1550 nm is obtained.

It has a maximum speed of 162 frames per second with a peak quantum efficiency of 76 %.

The high time resolution of FLIM dictates the use of photomultiplier tubes or avalanche photo diodes with peak quantum efficiencies in the range of 10-40% while the present spectral imaging setup is equipped with a detector with a >90% peak quantum efficiency.

Devices employing the narrow band emitter in MOLEDs consisting of a single pair of a high index dielectric, Ta2O5, and low index dielectric, SiO2, exhibited a high peak external quantum efficiency of 33.7% compared to a standard OLED in the same device architecture with a peak external quantum efficiency of 25.6%.

At 0 V, the peak absolute responsivity was estimated to be larger than 0.078 A/W at 270 nm, corresponding to a peak external quantum efficiency of over 35.8%.

The peak photocathode quantum efficiency was found to be very high of 37% at the wavelength of 340 nm.

The detector dark current density is 5.3 ± 0.2 μatcm2 at −1 V bias, and with a peak external quantum efficiency of 12.6 ± 0.3% at a wavelength of 640 nm.

The peak external quantum efficiency achieved in tandem LECs is up to 5.83%, which is higher than twice of that obtained in single-layered LECs due to improved carrier balance.

The phosphorescent organic light-emitting device (PHOLED) based on this novel TADF host material displays a stable red phosphorescence region, a peak external quantum efficiency (EQE) value of 12.9% and a low EQE roll-off of 38.8% at a luminance of 10000 cd/m2, which is benefited from the reverse intersystem crossing (RISC) of TADF host and less populated triplet exitons.

Semonin, O. E. et al. Peak external photocurrent quantum efficiency exceeding 100% via MEG in a quantum dot solar cell.