"peak overload" is correct and usable in written English.
It is used to describe a situation when something is overburdened with work or requests, usually due to a surge in demand. For example: "Our servers experienced peak overload during the holiday shopping season, with requests surging throughout the day."
The effects of relative density, mean stress and a single peak overload on the FCP response are investigated.
Single peak overload retardation of corrosion fatigue crack growth under constant ΔK control was studied for A537 steel in air and in a 3.5% NaCl solution at the applied cathodic potential of − 1400 mV SCE) and in free corrosion condition.
In air or in 3.5% NaCI at the cathodic potential, delayed retardation occurred after applying a peak overload, the crack growth consisted of three stages: crack extension due to overload; decelerating in crack growth; and resumption of crack growth rate.
Fatigue crack propagation tests in constant amplitude loading, as well as with single peak overloads, have been performed in AlMgSi1-T6 alloysium alloys with different Mn and Cr contents.
A simple micromechanical model for the competitive influences of roughness-induced crack closure (RICC) and plasticity-induced crack closure (PICC) on fatigue during single peak overloads has been developed following the approach of Kamp et al. [Kamp N, Parry MR, Singh KD, Sinclair I. Acta Mater 2004 52 343].
Also, increased migration times from decreased localized electric fields induced by peak overloading (e.g., the high end of the linearity study) led to lower calibration curve correlations with migration-time correction.
This results in an overload peak on the operating system's UDP buffer and causes several datagrams to be lost, many of them being MR-UDP's Acknowledge and connection control segments.
In this work, we investigated experimentally, how a single overload peak affects the performance of a bonded composite patch repair in cracked Al 2024-T3 and 7075-T6 samples fatigued under a cyclic loading.
For instance, for garage charging scenarios, uncontrolled EV charging may lead to unwanted peaks and may overload some of the grid components, such as the distribution transformer.
Some of the foreseeable threats include abrupt peak load increase, overloading of distribution transformer and lines, increase in line losses, and voltage sags [2, 3, 4, 5].
We studied the effect of three overload peaks; 9, 12 and 14 kN, applied just before and soon after the bonded composite repair.
