Sentence examples for peak friction from inspiring English sources
Quartz displays oscillatory and transient variation in frictional behavior at times after the peak friction has been attained, whereas the experiments on clay minerals show a continuous decay from peak friction to the steady-state value (Fig. 3).
Higher dilatancy ratios in these materials are associated with higher peak friction angles.
The dimensions of stable arches are a function of the peak friction angle, while the critical state friction angle dominates the height of the critical arch.
While ice-related delays in achieving peak friction were observed on traditional concrete, icy conditions did not have an impact on maximal shear force magnitude or timing on pervious concrete.
The proposed uncertainty model provides an analytical tool for the systematic treatment of uncertainties involved in the estimation of the in situ value of peak friction angle from the laboratory test results.
Given the strong correlation between the peak friction and the existence of a tribofilm in the cutting zone, the configuration is used to determine the lower limit of a cutting speed regime, which marks the initiation of lubricant starvation, in cutting of steel using an emulsion as a cutting fluid.
It is found that (Ti34Zr11Cu47Ni8 99Si1 glassy alloys have lower peak internal friction than the Ti34Zr11Cu47Ni8 glassy alloys, while (Ti34Zr11Cu47Ni8 98Si2 and (Ti34Zr11Cu47Ni8 99Ge1 glassy alloys have much higher peak internal friction.
However, instability of sands in dense state instigates at peak mobilized friction angle.
The peak internal friction of the single glassy phase alloy increases with increasing hydrogen content below about 20 at.% H.
These equivalent parameters, namely the equivalent peak cohesion, friction angle, and dilation angle, are then converted into their mobilized forms to account for the mobilization and degradation of JRC under shearing.
While Toyoura sand has the smallest angle of density change due to the largest peak internal friction angle and the effective particle size, dry powder clay has the largest angle of density change.
