Sentence examples for peak force at from inspiring English sources
Furthermore, analyses of the peak force-frequency relationship during direct tetanic stimulation (40 100 Hz) revealed that AT soleus muscles develop significantly higher peak force at 40 and 60 Hz when compared to AC muscles (Fig. 2a).
Simulation of muscle properties shows that mandibles reach their peak velocity near the start of jaw closing, peak force at the end of jaw closing, and peak power output at about 25% of the closing cycle time.
T3: At 3.0 mm of canine misalignment (after 3 s from T2 and 16 s from T0). Peak force at 3.0 mm.
This stimulation setting resulted in the load cell measurement of 0.42 N peak force at the third digit tip.
Considering the peak force at the end of the insertion, the Hifocus 1J electrode insertion tool had higher values than techniques with forceps and motorized tool.
The fracture load was recorded at the peak force as Newton (N) at the point that the femoral neck fractured [ 13].
The amplitude of the potentiated high frequency doublet (PDb100), the ratio of paired stimulation peak forces at 10 Hz over 100 Hz (Db10∶100) and the amplitude of the potentiated twitch peak torque (Pt) that followed the two doublets (see figure 2) were analyzed for both KE and PF.
However, as shown by the force displacement curves in Figure 2b, the block A and block B test materials reached their peak forces at mean displacements of 3.17 mm (sd 0.63) and 3.19 mm (sd 0.52), respectively, while the cadaveric femoral heads reached their peak forces at a mean of 5.89 mm (sd 2.14).
The force displacement curves for all three materials tested with the DHS reached their peak forces at similar mean displacements of 1.48 mm (sd 0.12), 1.2 mm (sd 0.14) and 1.5 mm (sd 0.41) for block A, block B and the femoral heads, respectively.
A significant difference was also seen at the peak force and at 5 seconds of the fatigue trains, and with a longer fatigue half-time (FT1/2) in the DXM-treated group than in the other two groups.
