Sentence examples for pattern of specimen from inspiring English sources

Figure 14d shows the damage and crack pattern of specimen J-H, which was strengthened with haunch elements.

Also obtained in tests using different speeds, the corrugation pattern of specimen F is well-distributed along the circumferential direction, exhibiting smooth (trough) and unsmooth (crest) areas with a distance between of about 1 mm.

Open image in new window Fig. 6 Scars of specimens E and F under SEM. a Smooth area of specimen E. b Crest of specimen E. c Trough of specimen E. d Uneven wear pattern of specimen F. e Crest of specimen F. f Trough of specimen F. The worn surfaces of specimens E and F, tested using rotation speeds of 32 and 94 rpm, respectively, exhibit uneven wear phenomena (Fig. 6).

Figures 13 and 14 show the failure pattern of specimens TP-35 and TP-37, respectively.

The hybrid layer and fracture pattern of specimens were analyzed by scanning electron microscopy (SEM).

The influence of rubber content and particle size on the mechanical properties of RC was investigated, including axial compressive strength, elastic modulus, peak strain, ultimate strain, appearance of visible cracks and failure pattern of specimens.

The crack patterns of specimens S1, S4, and S5 are shown in Fig. 9.

Open image in new window Fig. 10 Failure patterns of specimens.

Open image in new window Fig. 9 Cracks patterns of specimens S1, S4, and S5.

The XRD patterns of specimens cured for different setting periods are shown in Fig. 7.

Open image in new window Fig. 9 Crack patterns of specimens at failure. a Specimen E1, b Specimen E2, c Specimen E3, d Specimen E4, e Specimen E5 and f Specimen E6.