Sentence examples for pattern of coatings from inspiring English sources

The XRD pattern of coatings with different stand-off distances shows that the only distinguishable phase is pure aluminum.

The XRD pattern of coatings with different gas flow rates shows that the only highest intensity of peaks appears at highest gas flow rate.

The X-ray diffraction patterns of coatings exhibited predominantly MoS2 (002) and TiB2 (100) reflections.

Results show that the surface patterning of coatings favored the spinodal decomposition of the metastable (Ti,Al N phase into the Ti- and Al-rich (Ti,Al N phases because the space between the coating stripes could relieve the coherency strain energy.

The results show that substrate laser-discrete quenching changes the failure patterns of chromium coatings during firing, and some periodic through-thickness cracks in the fired chromium coatings are justly located at original substrate zones between two adjacent laser-quenched tracks.

Diffraction patterns of obtained coatings show well pronounced reflections inherent to anatase phase of TiO2.

The wear patterns of the coatings were analysed in tribological tests.

The formation of γN phases in low temperature PAN is discussed in the light of electron backscatter diffraction measurements and by comparison with X-ray diffraction patterns of RMS coatings.

XRD patterns of Ti coatings without HA showed that titanium nitrides formed in the titanium deposits sprayed with plasma gas containing N2. Scanning electron microscopic observation showed that these Ti deposits had an acicular texture.

The X-ray diffraction patterns of the coatings show that these additives do not modify the structure of the hureaulite; however, the effects of each additive are observed through the crystal size vs immersion time curves and the polarization curves recorded for each bath.

The XRD patterns of aluminium coatings with 80, 100, 120, 140 mm standoff distance are shown in Fig. 3.