Sentence examples for paths obtained by from inspiring English sources

As traffic flows can follow different paths depending on the routing strategy, we compare the resulting cost and gain when they are routed along the min-cost path, the paths obtained by solving the min-cost multicommodity flow and the multicommodity capacity network design problem.

c Parallel paths obtained by light path alignment.

However, one of the drawbacks of this kind of models is that the paths obtained by the discovery route process may not be always useful to any sessions (due to a scarcity of route resources).

Propagation paths obtained by minimizing these two distances integrated along the path, as well as the conventional distance metric defined by Yatziv [3], are presented in Figures 1 and 2. Figure 1 shows the paths propagated from scribbles placed over highly textured regions (hair and tree).

For mmWave channel, the small-scale MIMO channel fading model is a virtual model with 25 paths obtained by the timing overlap of the Saleh-Velenzuela (SV) model, the carrier frequency is set to be F C =45 GHz in mmWave band, the chip rate is F S =440 MHz, and the maximum multi-path time delay is T M =100 ns.

So we can conclude that from Violaxanthin the paths obtained by the above two methods are differnt till it arrives at the metabolite Xanthoxin.

The aircraft flight path obtained by GPS was temporally aligned with the SPR detection signal, allowing mapping of the geographical distribution of analyte release.

Through the implementation of the simulator with the variable blank holding path obtained by the virtual database and FEM-assisted intelligent press control system, a high quality product was obtained with higher strength.

Meanwhile, to guarantee the tool path, obtained by reversely mapping the streamline onto the surface, be smooth, continuous and no unappealing visual artifact left at the blending area of two adjacent patches, the condition maintaining G1 continuity of the vector fields between the adjacent patches is also given, avoiding planning additional tool paths to machine the blending areas.

It is found that by increasing the thickness of nanobeams, the postbuckling equilibrium path obtained by the developed non-classical beam model tends to the one predicted by the classical beam theory and this anticipation is the same for all selected boundary conditions.

a Shows the trend of iteration number of the first path obtained by TGSARWI.