Sentence examples for parallel rib from inspiring English sources

The analysis of two coupled parallel rib waveguides of SiO2/TiO2 SiO2/SiO2 on silicon substrate is presented.

The indigenously developed beam propagation method (BPM) simulation tools are applied to observe the power coupling between two identical parallel rib waveguides and to study the dependence of the coupling length on various parameters of the rib waveguides including the refractive indices, rib height, guide thickness, clad thickness and separation between them.

Nov. 11, when written numerically, 11/11, is the date that most closely resembles the parallel ribbing, technically called "wale," characteristic of the cloth.

9 × 9 mm2 pieces of Si (1 1 10) substrates were patterned with a Leo Supra 35 field emission scanning electron microscope (FE-SEM) and subsequent reactive ion etching in an Oxford Plasmalab 80 reactor into 200 × 200 μm2 large arrays of parallel ribs along the [1 −1 0] direction.

The foliar epidermis of Bd is characterised by distinct cell types organized in a succession of parallel ribs and furrows.

The test results reveal that a joint consisting of parallel perfobond ribs and a joint consisting of studs with sufficient reinforcement show the similar beam strength and failure modes resulting from the failure of the PSC components.

A new type of joint consisting of parallel perfobond ribs, encased prestressed concrete, and steel plates, is adopted and tested to remove the vulnerabilities from joint areas where PSC I-section and steel I-section are connected.

Indeed, with the parallel-perfobond-rib-type joint, advances in constructional convenience as well as structural capacity can be anticipated.

Transversal sections (4 μm thick) were cut parallel to the rib axis using a Polycut E microtome (Leica, Wetzlar, Germany).

We found that the pleura was highly nonlinear and mildly anisotropic, being roughly twice as stiff in the direction parallel to the ribs vs. perpendicular to the ribs (large-strain modulus = 20.44 vs. 11.49 MPa).

However, when both plates are ribbed plates, one with ribs orientated perpendicular to the junction and the other with ribs parallel to the junction, the available SEA models which assume an effective isotropic plate, or an equivalent isotropic plate or angle-dependent bending stiffness all underestimate the energy level difference.