Sentence examples for oxide stability from inspiring English sources
The titanium protection is directly related to the oxide stability in high pH systems.
However, increasing the number of pulses had a significant impact on oxide stability in the heat affected zone due to increased crystallinity.
X-ray photoelectron spectroscopy and Raman spectroscopy was used to determine surface composition and oxide crystallinity, while oxide stability was determined via potentiodynamic cyclic polarization.
Another conclusion that might be drawn during analyzing the results is that, for anionic ASP, the influence of the polymer molecular weight on the chromium (III) oxide stability is clearly visible.
The anodic deposition of oxide matrix composites from electrolytes containing either Pb2+ or Tl+ ions and catalytic (nano particles in suspension produces electrocatalytic materials especially suitable for anodic processes (oxygen evolution reaction) owing to the oxides stability towards oxidative degradation.
The E and pH - dependent variation of Cp was correlated with the surface oxides' stability and H+/Na+ surface/near-surface reversible redox processes.
Engineers and scientists have repeatedly reported that heavy metal contamination could significantly affect the oxide film stability towards water.
The result using titanium oxide showed stability enhancement of 15% (Fig. 4) in comparison with Pt/rGO catalyst and the increase of its power output by 55%.
By removing moisture from the oxide, thermodynamic stability of the Ga2O3(Gd2O3)/GaAs heterostructures and the interfaces were achieved with high temperature annealing, the oxide remains amorphous and the interface remains intact with atomic smoothness and sharpness.
In order to investigate the effects of solution pH on the chromium (III) oxide suspension stability, the measurements were performed at pH equal to 4, 7.6, and 10.
With regard to the chromium (III) oxide suspension stability, the presence of lower molecular weight polyamino acid destabilizes the suspension (TSI = 53.64), while the addition of LYS 33,000 clearly improves the stability (TSI = 23.24).
