Sentence examples for overlap joint from inspiring English sources

The special element represents a section of the composite beam or the overlap joint as an element with four nodes.

Lifting the sample in the SULTAN facility, either the hairpin or the overlap joint can be placed in the center of the facility and tested under ITER-relevant operating conditions.

The fatigue test was carried out for two different types of welded joints with raised edge specimens and with overlap joint specimens based on the nominal and notch stress approaches.

The joint sample includes two full-scale joints, one in the hairpin configuration at the bottom of the sample and one as an overlap joint at mid length of the sample.

The peel strength per unit of width is determined by the ratio between the maximum force and the width of the overlap joint.

Using this mold, the final geometry of the SLJ specimen had an overlap joint of 33.5 mm, a joint width of 25.3 mm, and adhesive and adherends thicknesses of 0.15 mm and 2 mm, respectively.

Friction spot joining is an alternative technique to produce metal-composite overlap joints.

3 3 mm butt welded joints shows the highest fatigue strength in comparison with 3 5 mm butt welded and overlap joints.

The main objectives of the paper are to exploit the mechanical behaviour of overlap joints produced by this proposed method and assess its potential as an applicable technology.

Friction spot welding is a relatively new solid-state joining process able to produce overlap joints between similar and dissimilar materials.

The present work demonstrates the feasibility of the innovative Friction Riveting joining technique on glass fiber reinforced composite/lightweight alloy overlap joints for structural engineering applications.