Your English writing platform
Discover LudwigSuggestions(2)
Exact(4)
4 5 and Fig. 2. When the sight distance lies outside the length of the horizontal curve (L) the analysis is slightly different.
This allowed the authors to investigate on the mechanical behaviour of shear in the presented test beams outside the length needed for the prestressing force to gradually develop over the member's height.
The study examines these restrictions for the conventional case when the stopping sight distance lies within the length of the horizontal curve (case 1) and when the stopping sight distance lies outside the length of the horizontal curve (case 2).
The study examines these restrictions for the conventional case (case 1) when the stopping sight distance lies within the length of the horizontal curve (i.e. SSD ≤ L) and for the second scenario (case 2) when the sight distance lies outside the length of the horizontal curve (i.e. SSD > L).
Similar(56)
Data were cleaned with the SmartKitCleaner and Pyrocleaner tools [ 65], based on the following steps: i) clipping of adaptors with cross_match [ 66]; ii) removal of reads outside of the length range (150 to 600); iii) removal of reads with a percentage of Ns greater than 2%; iv) removal of reads with low complexity, based on a sliding window (window: 100, step: 5, min value: 40).
While the caterpillar crawled one segment at a time on the outside, the entire length of the gut shortened when the rear segment moved forward, then lengthened again as the head made its step forward.
With the operator's index finger inside the mouth and the thumb outside, the whole length of the nasolabial fold is compressed to create a flat shaped material deposit (Alam and Yoo 2007).
Place the short strips at their pre-determined location of the grid against the outside frame along the length of the bench.
The experimental results indicate that the migration ratio of carbon nanotube increases with the increase of the outside diameter or the length of carbon nanotube.
From the above researches, it can be seen that the CNTs physical dimension (i.e., the outside diameter and the length of CNTs), refrigerant type, CNTs concentration, oil concentration, and heat flux have influences on the pool boiling heat transfer of refrigerant-based nanofluid.
Moreover, we do not consider the "core" sequences to be inherently more informative than the outside areas, since the lengths of the core (which we define as ranging from C1 to C6) differed greatly between MSA methods (Table 2).
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com