Sentence examples for outlet zones from inspiring English sources

Wastewater, sediment and plants were sampled monthly in the inlet and outlet zones of both CWs.

Typical situations in fracture networks are parameterized by fracture inclination, flow path length along the fracture and intersection lengths in the entrance and outlet zones of fractures.

Furthermore, sulfur compounds were detected in both inlet and outlet zones of the microreactor, coming probably from a lubricant applied over the screws that sealed the assembling of the microreactor.

However, inhomogeneous surface properties of the stationary wall giving different fluid-wall interactions respectively in the inlet and outlet zones of the channel were found to give the fluid mass flow rate considerably larger than homogeneous wall surface properties give, when the tilting angle between the walls is relatively large and the wall separation is small.

The reported decrements were from 9.3 × 105 MPN/g to 1.5 × 103 MPN/g and 1.5 × 102 MPN/g, in the middle zone and outlet zone composts.

Parametric studies are carried out to illustrate the influence of the Reynolds number on the appearance of flow fluctuations at the outlet zone of the monolith.

This work reports theoretical studies of flow behaviour in a monolith outlet zone for different Reynolds numbers covering laminar and transitional/turbulent flow regimes.

The final value obtained in the middle zone is higher than the value obtained in our study while the value obtained in the outlet zone is similar to the value obtained in our study.

For example, during combustion of DDGS-MRFR (90 10) the average temperature near the flue gas outlet zone of the fluidised bed combustor was found to be 671°C and therefore this suggestion appears plausible.

For the designed inhomogeneous surface properties, the fluid mass flow rate is more sensitive to the interfacial slippage in the inlet zone than that for homogeneous surface properties, while it is much less sensitive to the interfacial slippage in the outlet zone than that for homogeneous surface properties.

"We have, for example, produced guidance on the regulation of fast food outlets, with recommendations such as using fast food outlet exclusion zones in school areas," says professor Kevin Fenton, National Director of Health and Wellbeing.