Your English writing platform
Discover LudwigExact(2)
In general, the lower the opening ratio (or inlet to outlet ratio), the higher the pressure drop inside the building.
It has been revealed that the concentrator works best when the turbine is behind the concentrator at a distance of less than 5 cm from the concentrator and the concentrator inlet to outlet ratio being 6.
Similar(58)
Inlet-to-outlet ratio and relative location of openings on a building façade are important parameters to be considered, in addition to the wall porosity.
As inlet flow composition rarely affects outlet decomposition ratio, we found out that outlet decomposition ratio can be approximated solely as a function of the non-dimensional design parameter.
The outlet humidity ratio and outlet temperature might also fluctuate largely during the start-up process.
These indexes were later associated with the effluent fraction of disinfectant (inlet and outlet disinfectant ratio).
The average percentage predictive error for the outlet humidity ratio was between −2.21 and 0.43% (SD ≤ 4.82%).
The experiments were designed to find the influence of parameters such as the overflow to the underflow outlet diameter ratio and inlet pressure on the separation efficiency of a hydrocyclone.
It turns out that an increase in operating pressure and catalyst surface area leads to an increase in outlet decomposition ratio while the reverse is true for an increase in mass flow rate.
Results show that: there are many factors to affect solar chimney ventilation that include heat collection height and width, solar radiation intensity, inlet and outlet area ratio of chimney and air inlet velocity, etc.
The difference between the absorber LiBr inlet and outlet percentage ratio, the coefficient of performance of the unit in relation to the generator temperature, the efficiency of the unit in relation to the solution heat exchanger area and the solution strength effectiveness in relation to the absorber solution outlet temperature are examined.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com