Sentence examples for outlet cross section from inspiring English sources

The optimization parameter of the target design, in which the radius of outlet cross section is 60 ± 1 mm, is verified to form a stable and controllable free surface and to reduce the formation of air bubbles.

In this study, morphology and flow characteristics of the free surface of the windowless target were analyzed through the volume of fluid model using computational fluid dynamics simulation, and the results show that the outlet cross section size of the target is the key to form a stable and controllable free surface, as well as the outlet with an arc transition.

Even though the boundary element method itself is a truly three-dimensional analysis tool, it has not been effectively used on large silencers due to the large inlet and outlet cross sections.

Moreover, the water quality at the outlet cross-section would be still in class V (3838-02), indicating more measures should be taken to further reduce the loads.

The jet noise has a minimum value if a bow shock wave occurs at the outlet cross-section of the nozzle.

However, the abrupt outlet cross-section contraction created by variably-shaped orifices causes strong modification of the flow within the tube resembling a three-layered structure characterized by an alternating axial velocity directions.

The solution is expanded into sums of guided modes on both inlet and outlet cross-sections.

Therefore, a flat uniform velocity distribution at the nozzle outlets cross-section with a simultaneously low turbulence intensity is required to ensure a safe operation.

This allows for full design of the ejector, where defining the ejector load and the pressures of the motive steam, evaporator and condenser gives the entrainment ratio, the motive steam pressure at the nozzle outlet and the cross section areas of the diffuser and the nozzle.

These inlet channels converged to form a single outlet channel (rectangular cross section 1500 µm wide, 300 µm high, and 10 mm long).

Five distinct parameters, namely height of cross section of the fan, outlet angle of the flow relative to the fan axis, thickness of airflow outlet slit, hydraulic diameter, and aspect ratio for circular and quadratic cross sections were considered.