Sentence examples for outflow temperature from inspiring English sources
The performance indicators are thermal losses, pumping work, discharge outflow temperature, and overall storage efficiency.
Ecologically-relevant parameters such as maximum outflow temperature, duration of temperatures exceeding thresholds for coldwater species, and thermal load have all been considered in past research.
When reducing the mass flow rate, the outflow temperature of the working fluid reaches 74 °C, the temperature of the PV module remains around 31 °C at a constant electrical efficiency about 9.6%.
The synthetic log of GPK-3 presented in Figure 6 contains lithology, GR, ROP, natural inflow and outflow, temperature inflow and outflow, and six-arm caliper (radii RD1 to RD6) data.
Generally, ΔT refers to the difference between the outflow temperature of compressor and the bottom liquid stream temperature of column, and it should not be lower than the minimum heat transfer temperature difference (ΔT min = 10 °C) [20, 22].
The majority of outflow temperatures were warmer than inflows for all land uses throughout the year, especially in the summer.
Other characteristics of the system such as different dimensionless variables, plates and outflow temperatures, efficiency, and mass flow rate have been empirically modeled based on these variables.
In recent years, some GSHPSs are experiencing a gradual decrease in BHE outflow temperatures and thus have to be shut down.
Constraints were imposed to obtain storage systems with specified capacities and limits on the air outflow temperatures during charging and discharging.
The stratigraphic association of geyserite and horizons with bubbles in EPS can be explained as a function of Walther's Law, owing to laterally shifting discharge conditions or intermittent decreases in spring outflow temperatures, as vent geyserite can be found interbedded with mid- and low-temperature sinter apron fabrics34.
The flow rate within the pipes from and to the heat storage, as well as the in- and outflow temperatures, is logged continuously during the operation phase of the system.
