Your English writing platform
Discover LudwigExact(16)
However, at the outer target, the ion temperature is still high which may cause the target erosion.
This result shows that the peak heat load on an outer target plate of the advanced divertor is about 40% of that of the standard divertor.
The erosion was quite location sensitive and less on the upper middle surface of a tile on outer target of upper divertor (OT1) than on other tiles.
Up to reasonable limits, increasing the target size and the sputtering intensity for the outer target portion significantly improves the uniformity across the wafer and the symmetry on the trench sidewalls near the wafer edge.
A short super-X divertor (SXD) is proposed as an option for the Demo divertor, where the field line length from the divertor null to the outer target was largely increased compared to a similar-size conventional divertor.
Higher D retention was observed near the strike point (SP) on the outer target and on the tiles far away from the Li ovens, as well as in the specially designed reference holes.
Similar(44)
Both peak heat flux onto inner and outer targets are below 10 MW/m2 is achieved.
In all three experiments, outer targets were only cued when the hands were aligned with them.
Cueing effects for specific combinations of target eccentricity and hand alignment were only significant for outer targets with hands aligned [see the error bars in Fig. 2C; inner targets, inner hands, t(21) = 0.7; inner targets, outer hands, t(21) = 1.9, p =.07; outer targets, inner hands, t(21) = 0.5; outer targets, outer hands, t(21) = 4.7, p <.001].
Moreover, outer targets in both experiments were only reliably cued when hands were aligned with these targets.
The LEDs within pairs were vertically spaced by either 4.8º (inner targets) or 11.7º (outer targets) of visual angle.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com