Sentence examples for outboard system from inspiring English sources

While the price for the Pure Outboard system including a motor, battery pack and charging station, hasn't been finalized yet, the CEO says it will be close to $12,000.

Two million Pure Outboard systems at $12,000 a pop would add up to $24 billion in minimum potential sales.

Central Time, as Ron mentioned, we saw indication of offscale low temperature measurements on the left inboard and outboard the hydraulic systems.

Both tested jet propulsion systems yielded dramatic improvements in animal safety compared to a traditional outboard and propeller arrangement.

The vessel used for sedation of whale #3311 was a 7.2 m rigid hull inflatable boat (RHIB) operating one of two 90 hp four cycle outboard motors, with the projection system being operated from a platform 2.5 m above sea level.

This paper describes a design solution that has been proposed for the European Helium Cooled Solid Breeder Reactor that allows transporting the heat from the inboard to the outboard side with a passive cooling system located in the VV and based on natural circulation of liquid lead.

The model turtles were subjected to impact by small (3 6 m) vessels with traditional outboard, jet outboard, and inboard jet propulsion systems under controlled conditions in the field.

In this paper, the effects of structural nonlinearity due to free-play in both leading-edge and trailing-edge outboard control surfaces on the linear flutter control system are analyzed for an aeroelastic model of three-dimensional multiple-actuated-wing.

The offensive armament was two 7.92 mm (.312 in) MG 17 machine guns fitted one in each wing outboard of undercarriage, operated by a mechanical pneumatics system from the pilot's control column.

Instead, improved designs, electronic fuel injection and automatic oil-metering systems kept it practical for chainsaws, outboard motors and snowmobiles.

The usual engineering considerations of providing an efficient thermal power cycle (gross efficiency ≃45%), while handling first-wall (∼1 MW/m2) and divertor-plate (∼5 MW/m2) surface heat fluxes, leads to 14-MeV neutron wall loads near 4.1 MW/m2 (average) and 5.6 MW/m2 (peak at outboard mid-plane) in a dual (PbLi and He) coolant system.