Sentence examples for orifice depth from inspiring English sources

Using receiver-operating characteristic (ROC) analysis, the calculated optimal cut-off values of a cavity's orifice, depth and width for the diagnosis of fibrous cap disruption were 1.4 mm, 1.3 mm and 1.88 mm respectively [86].

LAA orifice area, depth, and volume and the number of LAA lobes were assessed on reconstructed 3D imaging.

Regimes of synchronous, alternative and unsteady bubbling were clearly identified, and the effects of orifice spacing and liquid depth on bubbling synchronicity and frequency were studied.

DL is a minimally invasive procedure in which a fine plastic microcatheter is threaded into the nipple duct orifices to a maximum depth of 1.5 cm.

Quantitative analysis of architectures extracted from captopril osmotic pumps drilled by a range of operating parameters indicated that laser power correlated with the cross section area, volume, surface area and depth of the orifices, while scanning speed of laser beam showed inverse relationships with the above structure characters.

It also led to a smaller orifice size comparing to the duct depth.

In the presented actuator parameters, the synthetic jet is enhanced as the decrease of cavity depth for the fixed orifice.

The results show that the geometric parameters of the actuator, such as the cavity depth and diameter, as well as orifice thickness and diameter, have important influences on the synthetic jet fluidic characteristics.

Freshwater samples were taken directly from 0.2 m depth in 500 ml 7 cm diameter orifice bottles precleaned with dilute HCl, or by using PUF polyurethane foam as described in (Muqi and Wood 1999), from the pelagic zone of Tigris river, located in the beach of Baghdad University (Jaderyah location), Baghdad, Iraq.

The multi-orifice plate, designated as M6D8.0 with 6 orifices and 8.0 mm-diameter, offers the intermediate length of penetration depth (approximately 35 mm).

With the aid of invasive measurement techniques the region surrounding the injector nozzle was investigated with respect to the penetration depth of the gas jet above the nozzle orifice as well as the jet opening angle.