Sentence examples for orientation road from inspiring English sources

The FDM process parameters considered in this study includes layer thickness, air gap, raster angle, build orientation, road width and number of contours.

The FDM process parameters considered for experiments are layer thickness, air gap, raster angle, build orientation, road width and number of contours.

Short-term creep experiments were conducted at prescribed combinations of FDM operating conditions, namely layer thickness, air gap, raster angle, build orientation, road width and number of contours, as per DSD matrix.

In this study, influence of critical FDM parameters layer thickness, air gap, raster angle, build orientation, road width, and number of contours are studied using Q-optimal response surface methodology.

The influence of fused deposition modeling (FDM) process parameters (layer thickness, air gap, raster angle, build orientation, road width, and number of contours) on the processing cost and dimensional error has been investigated in this study using statistical design of experimental approach involving response surface methodology.

Their positions and velocities in direction perpendicular to the road orientation are calculated in the same manner as for the obstacles already appearing on the road.

In addition, the along-track speed can be derived from the range speed using the road orientation as a priori knowledge.

In our previous study[3], we explored the use of smartphones, fixed to vehicles with predetermined orientation, to estimate road roughness where promising results have been observed.

With this a priori knowledge, detections from an ATI (across-track) detector and an MFB (along-track or Doppler rate) detector can be weighted accordingly depending on the road orientation [24].

In order to take into account these potential obstacles, they should be detected also and characterized among themselves relative to their velocity component perpendicular to the road orientation, in the following way.

The optimal condition was found to be layer thickness of 0.3302 mm, air gap of 0.0 mm, raster angle of 0°, build orientation of 90°, road width of 0.4572 mm and 10 contours.