Sentence examples for orientation obtained from from inspiring English sources

As building objects are expected to be connected with each other on a regional level, exploiting the main orientation obtained from the local gradient analysis provides further information for detection purposes.

It will be demonstrated in the "Experimental results" section that the position and orientation obtained from the Leap Motion Controller can be used to reproduce the human's movements without any prediction or estimation algorithm, but simply translating from Leap coordinates into world coordinates.

The bulk grain orientation obtained from electron backscatter diffraction and thermodynamic mechanisms of surface reconstruction during thermal etching suggest that the grain and facet surface-specific arrangement and relative amount of adsorbed proteins depend on the associated free crystal surface energy.

Figure 4 shows an example depth profiles of fiber orientation obtained from 3 ROIs in a piece of heart sample.

A monocular map of orientation (obtained from the central region to minimize boundary effects) is also shown in Fig.  8a.

Based on the measurement of relative information such as distances and orientations obtained from practical sensors, the formation is realized by employing the feedback linearization approach.

(c, d) The color bars show the stress orientations obtained from different fault types, which were retrieved from the World Stress Map (WSM) (http://dc-app3-14.gfz-potsdam.de/) (Heidbach et al.2010).2010

The most probable orientation obtained using our method and even from NMR data [34] depend on the backbone and side-chain conformations.

A feedback model between the stress perceived by a cell and orientation of the CMFs, which assumes an alignment of the CMF in the direction of maximal stress results in a very minor deviation of the stress pattern from the stress orientation obtained in the case of an isotropic material.

Fibre orientation was not affected by fibre content despite the higher processing pressure required and fibre orientation factors obtained from Modified Rule of Mixtures equations for Young's modulus and tensile strength were found to be similar.

Figure 3a presents the surface orientation map obtained from the AFM image shown in Figure 3b.