Sentence examples for optimum values and from inspiring English sources

These errors decrease the reliability of the optimum values and discard the realistic approximation of using surrogate models.

Therefore, in order to maximise the active damping effect, the feedback gains have optimum values and the loops need to be properly tuned.

Results are presented in graphical form together with optimum values and correlations, and compared with available experimental data from the literature.

Additional measurements were performed to validate optimum values and their corresponding to roughness value predicted by genetic algorithm with the values obtained from experiments in the mold cavity and on plastic product.

Pulp obtained using high ethanolamine and soda concentrations, and high temperature, short cooking time and low liquid solid ratio, exhibits values of the holocellulose, α-cellulose and lignin contents and viscosity which differ by less than 0.8, 3.2, 8.8 and 14.7%, respectively, from the optimum values, and a pulp yield that is only 22.6% lower than the maximum value (52.2%).

Effect of six key preparation factors on polyamide layer formation including: MPD, triethylamine (TEA), camphor sulfonic acid (CSA) and TMC concentrations; aqueous phase immersion time and organic phase immersion time were investigated to govern their optimum values and interactional effect on desalination performance.

The productivity of the proposed system showed also an increase with the increase of the day time till an optimum value and then decreased.

The gray and red lines denote the daily optimum value and 11-day moving average, respectively.

Results show that PSO is trapped on local optimum value and poor performance for higher dimension order is given.

If the current fitness value is superior to its own optimum value, then the current value is used as its individual optimum value and the current position is assigned to the particle's ( pbest ).

At a certain Sb spray treatment, the symmetry of the strain will achieve an optimum value, and the defects and dislocations will be reduced to a large degree.