Sentence examples for optimum toughness from inspiring English sources

Blends containing a fixed (5 wt.% IA) compatibilizer content were tough over a broad range of ABS contents; the optimum toughness occurred near 50 wt.% ABS.

This cluster strengthened condition produced the optimum toughness observed throughout the ageing sequence.

Toughness analysis indicated that the optimum toughness was anticipated to be obtained around a grain size of ∼1 μm for this FSP alloy.

The scaffold made of TCP/HAP with a ratio of 30/70 exhibited the optimum fracture toughness (1.33 MPa m1/2) and compressive strength (18.35 MPa).

The recent development of multi-step aging treatments and thermo-mechanical processes to improve fracture toughness of optimum strength Ti-15V-3Al-3Sn-3Cr has incranged the range of aerospace applications for this cold-formable alloy.

At the networks' optimum stoichiometry, the fracture toughness, assessed by the critical stress intensity factor (KIC), was slightly higher for the cresol novolac epoxy networks (∼1.1 MPa m1/2) than for similar phenolic novolac epoxy networks (∼0.85 MPa m1/2).

A strategy to design composite laminates with optimum combination of strength, stiffness, toughness and simple fabrication.

Microstructurally graded iron with grain sizes from nanocrystalline/sub-microcrystalline to microcrystalline range can facilitate novel applications which demand an optimum combination of strength and toughness with good corrosion resistance.

In case of a polyethylene fiber used in this study, the optimum value of the fracture toughness (critical strain energy release rate): GIC of the matrix was obtained to be 7.5 8.0 N/m.

The wear volume and wear rate of samples treated for 30 min were lower compared to those of the untreated samples, which may be attributed to an optimum combination of hardness and toughness and a low work hardening rate of the nanocrystalline structure at the surface of the treated samples.

In particular, the flexural strength and the fracture toughness increase at an optimum fibre content of 0.5 wt%.