Sentence examples for optimum spray from inspiring English sources
The optimum spray parameters (OSP) were 963 L/min for the oxygen flow, 28 L/h for the kerosene flow, and 330 mm for the spray distance.
The overall optimum spray drying conditions for obtaining lulo powder were 125 °C inlet air temperature, 3% (w/w) arabic gum, and 13.4% (w/w) maltodextrin DE16.5-19.5.
In this wok, all experiments have been carried out on mild steel flat specimens coated with atmospheric plasma spraying method using commercial industrial ceramic coating powder materials operated at optimum spray parameters.
The qualitative comparison of simulation and experimental results in tandem shows that nozzle-hole design is a critical parameter for obtaining optimum spray behavior in the engine combustion chamber.
Optimum spray parameters were obtained to produce a less porous and strongly adherent ZrO2 CaF2 composite through carefully selecting the powder feed rate, primary gas pressure and spraying distance.
These results revealed how particle temperatures affect the microstructures and mechanical properties of WS coatings, and demonstrated that optimum spray conditions have to be balanced by adjusting particle temperatures, facilitating sufficient deformability while avoiding oxide formation.
Two optimum spraying conditions that concern adhesion of coating to graphite and its hardness are obtained.
The optimum spraying conditions have been established by analyzing the relation of the coating properties with spray parameters.
In this study, Zr55Cu30Al10Ni5 metallic glass composite coatings were produced by gas tunnel type plasma spraying torch under optimum spraying conditions with selected plasma currents.
Experimental design is an effective method for conducting a reduced number of experiments in order to obtain the optimum spraying conditions and enhance the thermally sprayed coatings properties.
Combustion powder spraying has been used in the coating of graphite by a layer of Al and SiC composite utilizing the Box Wilson design that fixes the optimum spraying parameters of Al/SiC wt.% composition, substrate temperature and spraying distance.
