Your English writing platform
Discover LudwigSuggestions(1)
Exact(1)
The response time of the sensor was 40 s with an optimum response at pH 11.
Similar(59)
Relevant graphs are drawn; optimum response value at optimal factor levels is predicted.
It is shown that the optimum response is obtained at about pH 5.0, just below the neutral pH, which is consistent with the reported work [7].
The optimum response means was computed at different operating level for each of the extraction factor as reported by Abbass et al. (2016).
Nanocomposite sensor showed ∼ 48% optimum response for 30 ppm CO at temperature of 425 °C with stable low resistance.
The optimum response of variables for TEAC was also found at 37.5 42.5 °C and pH 3.50 4.25 with constant cofactor concentration (0.5% NaCl) (Fig. 2a).
From a practical standpoint, such a scenario will often cause uncertainty at the upper level as the optimum response from the lower level optimization task is indecisive.
Those reforms may well be the optimum response to that crisis.
ROC curves were plotted to define optimum response thresholds.
Optimum responses were observed for the carbon films fabricated at a deposition temperature of 1100 °C (PCF1100) by chemical vapor deposition (CVD).
The optimum current response was observed at 0.1 M HCl. Figure 10 Effect of different stripping solvents on DPASV current response.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com