Sentence examples for optimum resistance from inspiring English sources

Results showed the difficulty of simultaneously achieving optimum resistance and reactance.

Circuit analysis allows selection of optimum resistance and capacitance averaging factors to achieve maximum offset reduction in ADC designs.

The effect of the resistances of the inductor and piezoelectric elements were considered because the sum of these resistances may exceed the optimum resistance.

A thorough review of the literature on fatigue crack initiation indicates that for optimum resistance to fatigue crack initiation, a surface coating needs more than just a high hardness and that a combination of properties including toughness, cyclic work hardenability, residual compressive stresses, and adherence, in addition to a hardness higher than that of the substrate are required.

The performance of the passive vibration suppression using an LR circuit was compared to that of the method where a resistive circuit is used assuming that the sum of the resistances of the inductor and piezoelectric elements exceeds the optimum resistance.

Cells were treated with different concentrations of cisplatin, doxorubicin, etoposide and H2O2 (Sigma, St . Louis MO, USA) for different time points to select the optimum resistance or apoptotic dose.

The figures allow for the identification of the optimum membrane resistance coefficient vs. pump head ratio for each individual membrane.

The hardest samples were obtained at η of 67 J/mm3, and the optimum wear resistance was measured at η of 200 J/mm3.

When the Si content reaches 8.32 at.%, the film has the optimum corrosion resistance and good biocompatibility.

One approach that relies on computation methods to design the matrix compositions of the ductile phase for optimum fracture resistance and ductility is highlighted.

Here, the optimum corrosion resistance was obtained for the coating process condition at 500 V for 15 min in Ringer solution.