"optimum output" is a correct and usable phrase in written English.
It refers to the maximum or most efficient amount of production or performance that can be achieved. Example: The company implemented new strategies to increase their optimum output, resulting in a 20% increase in profits.
Besides, the effects of the reactor parameters on the optimum output temperature setting were systematically studied.
The inner diameter required for optimum output flowrate was dependent on the length of fibre used, in which longer fibres used required a larger inner diameter to ensure optimum output flowrate.
The output voltage and current were investigated to obtain the optimum output based on the result of the simulation.
Although the precise numbers required are difficult to determine, the best calculations, considering both the assembly operation and the stamping of body panels, place the optimum output at between 200,000 and 400,000 cars per year for a single plant.
When FeCuNbSiB layer thickness, cantilever length and turns number is 30 μm, 5 cm and 750, the optimum output power and effective bandwidth of HVEH achieve 36.8 mW and 5.6 Hz for an acceleration of 0.75 g at frequency of 32 Hz, respectively.
The purpose of this study is to provide a detailed safety analysis of overall system and components in terms of their ability to provide optimum output from the irradiation of TeO2 in the central thimble of the 3 MW TRIGA MARK II research reactor at Atomic Energy Research Establishment (AERE), Savar, Dhaka, Bangladesh.
A full prototype of the design with the optimum outputs was built and investigated using SPIV.
This was done for determining the electrode area for optimum electrical output and hydrogen production rate.
It has been found that the photoanode area corresponding to optimum electrical output and hydrogen production rate corresponds to ∼0.5 cm2.
The economic measure, however, explicitly considers the economically optimum potential output which could be produced given the capital stock, the technology, inputs prices, output prices when outputs are not fixed, and technically efficient and fully-utilized factors of production as appropriate to achieve maximum profit or minimum cost.
A PWM DC-DC converter with optimum segmented output stage is proposed in this paper whose efficiency at light load is improved.
