Sentence examples for optimum leading from inspiring English sources

However, by periodically introducing rich periods (periodic operation) the activity can temporarily be restored and the surface composition can be kept close to the optimum, leading to an overall improvement of the oxidation rate.

In addition, as shown in the simulation results presented later in this paper, the use of a single fixed θ jl n derived from the maximum transmit power level may already be near optimum (leading to θ-IFEM-1), thus θ jl n may not need to be updated at all.

The combination of these opposing effects suggested that optimum crystallinity leading to optimum wettability can be produced at intermediate speeds for improved biocompatibility.

Furthermore, we investigate the impact of the parameters of the dispersers to its stability, and we put forward in evidence that there are best (optimum) parameters leading to better stability of the particle stream.

TOPSIS decision-making method is employed to determine the system final optimum design, leading to an overall exergetic efficiency of 51.7% and the total cost of 0.324 million USD per year.

The process conditions were optimized using Response Surface Optimizer Tool in MINITAB 16 and pH = 3.5 and H2O2 concentration of 8.5 g/L was obtained as optimum condition leading to 49.39 ± 0.93% CBZ removal from pharmaceutical wastewater containing higher CBZ concentrations.

For CyA encapsulation in MePEO-b-PCL micelles, addition of acetone to water at lower organic to aqueous phase ratio is shown to be the optimum procedure leading to higher drug encapsulation and smaller average diameter for the self-assembled structures.

Thus, the choice of optic material can be solely driven by achieving optimum biocompatibility, leading to minimum cell and bacteria adhesion.

Optimum conditions leading to maximum recombinant-protein yield: recombinant strain was cultured in 100 mL BMGY medium 48 h to make full use of the glycerol to get the high density of the cells, then the cell pellets were harvested and resuspended in large volume 200 mL BMMY medium, added 100% methanol to a final concentration of 1% (v/v) at first 24 h, and induction time of 72 h.

Genetic algorithm coupled with neural network is employed to find optimum cutting parameters leading to minimum surface roughness without any constraint.

Furthermore, the I t curves measured over the entire anodization duration provide a facial method to monitor the anodization process and determine the optimum anodization time, leading to an easy obtaining of the desired nanotube arrays.