Sentence examples for optimizing the quantity from inspiring English sources

Optimizing the quantity, quality and speed of axon regeneration is important in maximizing functional outcomes following peripheral nerve injury.

Many investigations of geopolymer synthesis have focused on optimizing the quantity, constituents and concentration of the alkaline activator (Leelathawornsuk 2009; Mustafa et al. 2011; Somna et al. 2011).

After optimizing the quantity of Ti added to the top layer, we successfully fabricated a millimeter-long, small-diameter, single-wall carbon nanotube forest.

An integrated model for optimizing the quantity, locations and signal settings of mid-block crosswalks simultaneously is proposed to best trade-off the operational performances between pedestrians and vehicles.

Initial experiments were focused on refining the dimensions of the heater, optimizing the quantity and quality of CaO and water, and testing EPCM formulations with the goal of minimizing initial pre-heating time and variability during the specified incubation period.

In addition to optimizing the quantity of probe, a range of hybridization and washing temperatures were tested using 2 μg of 78 k shRNA pool probe.

Without fine-tuning experimental conditions, e.g. optimizing the quantities of oxidant added, these chemicals have been shown to affect the concentrations of multiple types of ROS and trigger concomitantly severe GSH/GSSG redox imbalance [ 16].

From the tracer distributions, statistical measures are calculated to optimize the quantity of tracer from a spill that would stay at sea as long as possible.

The real-time control made it possible to optimize the quantity of swine waste added as the load fluctuated from cycle to cycle.

A model is developed to optimize the quantity of mechanically ventilated floors required to provide satisfactory ventilation rates for the lower naturally ventilated floors and also minimize the energy consumption.

In addition we optimized the quantity of the catalyst added, as we found that 10 mol % of DABCO is the best quantity for the reaction yield and we found that as the quantity of the added catalyst increased or decreased the yield of the reaction become lowered (Table 2).