Therefore, pH optimization of the solution seems to be necessary in order to obtain the electrocatalytic oxidation of methyldopa.
After optimization of the solution pH, the dual enzyme biosensor was found to have a limit of detection (LOD) of 24 μM (7.6 ppm), and a sensitivity of 0.095 ± 0.024 nA/μM for dichlorofenthion.
Although DEMO is defined to be a one-of-a-kind device there needs to be in addition to the development of the IVC design solutions a remarkable emphasis on the optimization of these solutions already at the conceptual level.
The problem of finding minimal support sets has been modeled elsewhere [ 1, 2, 45] as a typical 'set-covering' problem, and numerous methods are known in combinatorial optimization for the solution of this problem.
The optimization of the standard solution of 67Ga for the radioactive source preparation is also discussed.
The optimization of the binder solution has been based on the dynamical viscosity and the surface tension.
However, optimization of the working solution composition is usually required for the adequate performance of any ion-selective electrode or ion-selective sensor.
During the optimization of the whole-cell solution, the concentrations of free Mg2+and of Mg2+complexed with ATP, GTP and EGTA were calculated using the computer program Bound and Determined (Brooks & Storey, 1992).
To assure applicability of the printed GMR sensors, they should provide stable response in the consumer temperature range from 0°CC up to +85 °C, which require careful optimization of the polymeric binder solution with respect to the thermal expansion coefficient.
The TLBP deals with the optimization of design solutions for serial machining lines.
