Sentence examples for optimization of the mass from inspiring English sources

Optimization of the mass spectrometry (MS) was performed.

These studies are needed to optimize construction and set up of a further 1 m3 prototype with ∼4000 calorimeter cells for measurements in hadronic beams (1 50 GeV) in 2005/2006 and serve for test and improvement of the simulation tools for energy-flow measurements in jets and optimization of the mass reconstruction of multi-jet final states.

For the initial optimization of the mass analyzer, pure standards were ran on fast LC gradients (10 min) employing the same solvent composition as described.

Using the point-mass parameters as design variables, the solution of this optimization problem optimizes the mass distribution of each link.

An optimization of the IST collector mass flow rate was performed based on the minimization of an energy loss cost function showing an optimal mass flow rate of 0.22 kg/s m2.

Optimization of the chromatographic and mass spectrometric methods and experimental conditions to enhance the resolution and sensitivity of the assay and obtain the highest quality mass response were achieved after several re-assessments.

The optimization of recompression mass fraction shows that the present cycle configuration yields maximum thermal efficiency for nearly equal heat capacity values of both fluids in LTR.

In order to demonstrate the potential of the proposed platform an example concerning the mass optimization of the Y axis of a gantry machining center is presented.

The structural optimization shows that the mass of the side plate is decreased by 194.50kg, the second and third modal frequency is increased by 1.73% and 2.91% respectively and a better optimal effect is received.

The optimization results give the mass flow rate of intermediate-fluid, diameter of pipeline, the temperature of the circuits and the matches of heat exchanger networks (HENS) automatically.

This paper deals with the analysis and optimization of tuned mass dampers (TMDs).