Sentence examples for optimal groove from inspiring English sources

The optimal groove width of 2 mm was found for the three groove number values (1, 2, and 3).

The estimation of fretting fatigue limit using a relationship between Kt/Kt0 and θd provided a good estimation with the experimental results and it would be a useful method to select the optimal groove shape.

The optimal groove array configuration corresponding to highest heat transfer coefficient was connected to its groove volume ratio which was the very transition point for the behavior of the dominant factor.

Test results show that there is an optimal groove geometry with the groove depth of 0.85 mm and pitch of 0.45 mm to achieve the maximum capillary performance, and sintering processes of 950 °C along with 30 min should be chosen.

The presented protocol vastly reduces the number of optimal patterned groove geometry configuration candidates to be evaluated; it is simple and effective for practical applications.

The thiophenes have the best shape to give the optimal minor groove binding conformation to DB1255 with the thiophenes and terminal amidines in position to strongly recognize the ATGAT sequence.

These results illustrate that the increased curvature of DB1256 is not optimal for minor groove binding.

This is the first report to propose the optimal design of grooves on the necks of dental implants for improving bone quality parameters as well as BMD.

That the bill sizes of two of the call types were smaller than predicted did not cause me to reject the hypothesis, in part because I was able to estimate the optimal width of the groove in the crossbill's palate that is used to secure seeds while they are husked; groove width influences seed handling time, whereas bill depth is related to providing access to seeds in the cones (Fig. 3).

Rectangular drawbead of a specific height was made on the binder surface at the optimal location and corresponding groove was machined on the die block and the forming process was executed.

This compound modification shows that the presence of two thiophenes is not sufficient for strong binding if the shape of the compound is not optimal for the ATGA groove.