Sentence examples for optical power efficiency from inspiring English sources
The use of super conducting energy-recovery linac could produce a major, cost-efficient facility with wall plug power to output optical power efficiency of about 1%.
Ridge lasers exhibited continuous wave operation at 80 K with an optical power efficiency of 62.5 mW/A/facet.
The high optical power efficiency of such diffraction gratings allows the use of much lower optical power than in previous interferometer designs using transmission gratings.
The use of superconducting energy-recovery linac could produce a major, cost-effective facility with wall plug power to output optical power efficiency of about 1%.
When the same bit rate/normalized bandwidth is achieved, for example square B vs. star D and squares C and D vs. star E, the ASCO-OFDM exhibits more optical power efficiency than ADO-OFDM does.
Simulation results show that for a given data rate and for the combined perturbations of vignetting, fractional misalignment, SSFO and APSF, NCS-OFDM shows slightly better optical power efficiency than SACO-OFDM and SDCO-OFDM.
The stirring effect saturates at higher laser powers since the order of the optical force efficiency drops rapidly after 3μm, as was shown in Fig. 2(b).
The units of optical force efficiency Q, can be related to the optical force, F, by F = nPQ/ c in which P is the beam power at the focus, and c is the speed of light in free space.
The Internal quantum efficiency, Optical power, current-voltage characteristics, spontaneous emission rate and carrier distribution profile in the active region are investigated using Sentaurus TCAD simulation.
Different aspects of CO2 laser studied include threshold excitation voltages, temperature dependent efficiency, optical power saturation limitations, pulsed and steady state discharge currents for optimum gases mixture combinations.
Based on this study, as well as the properties of the XY routing algorithm, we propose several approaches to optimize the power efficiency of optical NoCs by minimizing the number of waveguide crossings in the floorplan.
