Sentence examples for operational channels from inspiring English sources

These projects are reported back through operational channels and up into financial channels here in Washington, where they are submitted to Congress quarterly.

In order to operate on the 2.4 GHz ISM band to communicate with the SDR-based base stations as shown in Figure 3, the GPRS handsets require a frequency converter to shift the operational channels onto the ISM band [37].

Anik F1 will have a total of 84 operational channels; 36 C-band channels with an EIRP of up to 41 dB W and 48 Ku-band channels with an EIRP of up to 52 dB W.

These links and their operational channels and pathways are actively constructed, planned, governed and maintained.

The authors conclude that the PHY rate and the load dependent throughput must be considered to achieve high performance.[3] presents a user-centric framework to select an AP and its operational channel.

Therefore, only approximate modeling of hydraulic losses in operational fuel channels with fuel assemblies and imitating channels within the limited range of Reynolds numbers can be discussed as well as inclusion of all coolant flow regimes within the reactor vessel predicted by design calculations.

"Our civilian casualty figures reflect information we can verify through operational reporting channels and investigations," said Lt. Col. John L. Dorrian, an ISAF spokesman.

Further evidence for multiple operational recombination channels in the P3HT devices without the Nb2O5 interlayer comes from steady-state JV measurements where we monitor the open-circuit voltage (Voc) under different light intensities (see Figure 4 ).

WAVE multi-channel operational mode and the alternating channel switching procedure at every 50 ms are built on the top of the PHY and MAC layers to simulate the behavior of single-radio devices.

This requires OC retailers to set up connected physical flows of goods and operational structures across channels without sacrificing their business model due to growing complexity.

The high-resolution diagnostic is now operational with 32 channels separated by <1 cm and a frequency response of 1 MHz, measuring Te on the low field side, for typical machine operation at BT=5.4 T. We describe the operation of the radiometer based on two novel second harmonic mixers appropriate for these high frequencies.