Sentence examples for operation of the source from inspiring English sources

An implementation must be found for each operation of the source language.

The mechanical design features, principles of operation, operational parameters, beam quality information (emittance data) and efficiencies for forming intense beams of 17F− during off-line and on-line operation of the source are presented in this report.

Due to the use of the key disclosure delay to achieve asymmetry in authentication, time synchronization between the nodes taking part in the group communication is important for the correct operation of the source authentication protocol.

It is common in wireless communications to perform some form of linear precoding operation on the source signal prior to transmission over a channel.

In order to optimize the design and operation of the Ion Source for the ITER Neutral Beam Injector (NBI), a dedicated 100 keV Ion Source, identified as Source for the Production of Ions of Deuterium Extracted from RF plasma (SPIDER), is under construction in the Neutral Beam Test Facility, at the Consorzio RFX premises, in Padua, Italy.

The operation principle of the source is based on the in-gas laser ionization and spectroscopy (IGLIS) approach.

However, the instability of the arc limits the continuous operation of the FVA source, resulting in a poor productivity.

In order to demonstrate the performance of the drive using ACS control strategy different modes of operation of the hybrid source with the static and dynamic behavior of the control system is verified through simulation and experimental results.

For correct operation of the beam source, and to avoid deflections of the charged fraction of the beam, the magnetic field along the beam path must be very low.

(viii PAL major modification means, notwithstanding paragraphs II.A.5 and 6 of this Ruling (the definitions for major modification and net emissions increase), any physical change in or change in the method of operation of the PAL source that causes it to emit the PAL pollutant at a level equal to or greater than the PAL.

How to decrease the power consumption of the booster RF system during its stand-by time but not to sacrifice the reliability and availability of the RF system is obviously of fundamental interest for routine operation of the light source in a top-up mode.