Sentence examples for operating potentials from inspiring English sources

Therefrom, we theoretically predicted the optimum range of operating potentials, yielding design guidelines for catalytic surfaces.

The anode and cathode half-cells provided operating potentials of −0.44 and 0.48 V, respectively (vs. Ag/AgCl).

The analysis is conducted for operating potentials of 0.7 and 0.6 V and a range of current densities.

When [EMIm][BF4] electrolyte is coupled with electrodes containing PTFE binder, operating potentials as wide as 3.8 V can be utilised.

Single cells using these catalysts showed I E performance superior to that for the Pt/CB at operating potentials above 0.4 V.

For operating potentials below 0.4 V, a slight amount of Sn dissolution from the Sn0.96Sb0.04O2 δ support occurred, resulting in degradation of the cell performance due to Pt poisoning by Sn re-deposition, but no noticeable degradation at Sn0.96Nb0.04O2 δ was found, due to the suppressed Sn dissolution.

This surface area loss was found to be relatively insensitive to electrode operating potential.

The amperometric measurement was optimized at +450 mV operating potential and 30 mM ferricyanide in a 0.1 M phosphate buffer (pH 7.0) at 26 °C.

The effects of operating potential, inlet gas composition, inlet gas velocity, electrode permeability and electrode porosity on the coupled transport and electrochemical reaction as well as the electric output of the SOFC were invested in detail.

The robustness of MAXCOM in operating potential noise in biological networks is of great important because much noise is widely observed in existing biological data [ 42, 43].

An operating potential of 0.50 V (vs. Ag/AgCl/3 KCl mol/L) was exploited for amperometric monitoring.