Sentence examples for one half the height from inspiring English sources

However, without consideration for shear enhancements, a more conservative spacing for transverse anchoring is recommended to be around one half the height of the girder.

For best results, make sure the actual card is twice the height of the envelope and the pop up shape one half the height of it.

(ii) Not less than one-half the height of the largest type appearing in the part of the common or usual name of the food required by paragraph (a) of this section.

The section of the code states that if the distance from the part of the building being "altered or repaired" to the inside edge of the sidewalk -- known as the setback portion of the building -- is "less than one-half the height of the structure," a shed is necessary.

The temperature and major species results show that partial premixing reduces radial heat and mass transfer in the lower part of the flames, and causes an inner rich premixed flame front to form at one-half the height of the outer flame front.

For CBTs a common method is to make the level of the outlet at the end of the terrace one half of the height of the bund on the edge of the terrace, ensuring a freeboard of half the bund height.

Saggital sections of the head of the proximal phalanx are not circular, but, sections taken in the plane of maximum dimensions of the condyle are circular with a radius of curvature of approximately one half of the height of the condyles.

FTIR-RM = Fourier Transform Infrared microspectroscopy in reflectance mode; FWHM = full width at one half the maximum height; qBSE = quantitative backscattered electron; SEM/SDD-EDS = scanning electron microscopy/silicon drift detector energy dispersive X-ray spectrometry; XRD = X-ray diffraction.

The full width at one half the maximum height (FWHM) above background values of the well resolved 002 diffraction peak (25.8°) of the apatite in Calc7 and Calc8 as well as these of bone, dentin, enamel, physiological and highly crystalline apatites were determined with the Jade 6.1 software (Materials Data, Inc., Livermore, CA, USA) using the Pseudo Voigt function to model the peak shape.

Any barrier should be one-and-one-half-times the height of the machinery; masonry should have at least 12 inches of clearance space.

In the present study, leaf morphology was measured digitally using Image Pro Plus software (Media Cybernetics, Inc., Bethesda, MD) from image scans of the leaf closest to one-half the live crown height, in three biological replicates of 396 individuals.