Sentence examples for oil weight from inspiring English sources

Oil concentration was not related to oil weight but was related to plant dry matter at flowering and biomass remobilization.

The ethanolysis of sunflower oil catalyzed by calcium oxide was modeled and optimized in terms of the following operating conditions: reaction temperature (65 75 °C), ethanol:oil molar ratio (6:1–18:1), catalyst loading (10 20% based on oil weight) and reaction time (360 480 min).

The best process combination was 100% catalyst quantity (based on oil weight) with 56:1 molar ratio of methanol to oil at temperature of 30 °C, which reduced product specific gravity from an initial value of 0.912 to a final value of 0.8637 in about 4 h of reaction time.

Synthesis of biodiesel from waste canola oil using supercritical methanol is investigated under relatively moderate reaction conditions (240 270 °C/10 MPa) with residence time of 15 45 min and methanol to oil weight ratio of 1 1, 1.5 1 or 2 1.

A total of 96 male lambs were used in a 2×3×2 factorial design: 2 breeds, Suffolk×Lleyn and Scottish Blackface, 3 diet supplements, Megalac, linseed and linseed plus fish oil (a 50 50 mixture on an oil weight basis of fish oil and linseed, linfish) and two levels of Vitamin E (100 or 500 mg/kg feed).

A maximum predicted value of FAEE content of 98.9% was found by the RSM model under the following optimum reaction conditions: reaction temperature between 50 and 59 °C, ethanol-to-oil molar ratio of 12 1, catalyst loading of 0.75% (based on the oil weight) and reaction time of 15 min, which absolutely agree with the experimental value (98.6%).

Oil accounted for only 58 percent of Exxon's output, compared with 64 percent in the same period last year, and Shell's oil weighting dropped to 53 percent from 59 percent.

Did the heavy oil weighting hurt the S&P index's performance?

Meng et al. [70] were able to show the effect of feedstock quality on product distribution by investigating four types of feeds using a CEP-1 catalyst at a reaction temperature of 660 °C, residence time of 2.2 s, C/O weight ratio of 15.5 and steam-to-oil weight ratio of 0.75.

The amount of sulfur compared to oil sludge (weight of bitumen = 73 g, weight of sludge = 10/42 g) was calculated for bitumen, oil sludge, bitumen and old sludge.

Analysis showed that even the grounds contained about 10 to 15percentt oil by weight.