Sentence examples for oil tubes from inspiring English sources

Qantas briefly grounded its two A380s and subjected them to tests to see whether the misaligned boring was present in the oil tubes.

A differentiation between oil house paints and artists' oil tubes would be of interest in this context, but is not achievable by FTIR spectroscopy and requires micro-destructive mass spectrometry analysis [29].

In 2004, Lake and co-workers analyzed by GC MS the binding media of nine of Pollock's poured paintings dating from 1943 to 1950; they reported on the use of artists' oil tubes, oil commercial paints, oleoresin enamels and oil-modified alkyd house paints [31].

The ATSB alert followed detailed investigations of the QF32 engine, which revealed uneven boring in an oil tube.

On Thursday, investigators said that uneven boring inside an oil tube within a combustion chamber had caused thinning of the metal on one side.

The results also elucidate how formulations and processing technology influence the physical and drying properties of oil-based enamel paints, in comparison with contemporary artists' oil tube paints.

The artificial lift system, including oil tube, sucker rod, transmission cylinder and anchor, was designed in reference to the progressive cavity pump (PCP) artificial lift system.

As shown in Fig. 4, when the load reducer was working, the upper and lower ends of the load reducer piston were located in different pressure systems, casing pipe and oil tube, respectively.

The gear on axial group I drives the gears on the gear pump, and the lubricating oil in the pump, under the action of centrifugal force, was pumped out through the oil tube to filter, which filters out impurities in the oil.

In the position of the load reducer device, the pressure of the liquid column in the oil tube is much greater than in the casing pipe, the pressure difference acts on the lower end face of the load reducer piston to produce an upward lift force.

The dual-chamber solid and liquid mixture (SALiM) vibration isolator, mainly proposed for vibration isolation of heavy machines with low frequency, consists of four principle parts: SALiM working media including elastic elements and incompressible oil, multi-layers bellows container, rigid reservoir and the oil tube connecting the two vessels.