Sentence examples for of the total deflection from inspiring English sources
By adding ribs, flexure became more dominant and shear deformations of the ribs contributed only 15 20% of the total deflection.
A simplified mathematical model in this assumption, ignoring the small contribution of the total deflection of the vertical for practical applications, is normally given as Fig. 2 Local geoid (local vertical datum) and reference ellipsoid N=h-H, (1).
Drift accounted for <10% of the total deflection for all experiments used.
The effect of shear deformation on the total deflection of reinforced concrete beams has also been investigated, and the contribution of shear deformation to the total deflection of beam have been theoretically obtained in the case of various loading case by using the developed computer program.
A physical mathematical interpretation of the alternative first-order shear deformation concept proposed by the author is first presented to get rid of an intuitive aspect of its basic premise that the total deflection w can be assumed as the sum of the bending and transverse shear deflections wb and ws.
The main advantage of this experimental technique is to measure the total deflection of gear tooth with gear body deformation.
Therefore, the total deflection of the infrastructure caused by the train passages can be calculated as the sum of these relative displacements.
It is shown that, in comparison to current design guidelines, the proposed model predicts more accurately the total deflection of FRP RC beams at both service and ultimate loads.
A rigorous uniaxial finite element model was first validated against experimental results, and then used to predict the total deflection at the end of the 50-year service life of the specimens tested and of other specimens with different connection system not tested.
If the subgrade consists of very soft soils, then a gravel with a maximum grain size is used to minimize the total deflection (rutting).
The modified Mindlin theory operates with bending deflection as the basic variable for the determination of the total (bending + shear) deflection and the angles of rotation.
