Sentence examples for of the external diameter from inspiring English sources

The intramural haematoma usually compresses the true lumen of the artery and causes enlargement of the external diameter of the artery.

In this study, where the alloy is characterised by a slight densification, the anisotropic behaviour has a negligible effect on the precision of the height and the internal diameter, while the effect on the precision of the external diameter may be relevant.

Measurement of the external diameter of arteries was performed by ImageJ (http://rsb.info.nih.gov/ij/index.html).html

Hart performed morphometric determinations of the external diameter and wall thickness of intraparenchymal arterioles two hours after blood was injected into the cisterna magna of cats and observed a decreased external arteriolar diameter accompanied by an increased wall thickness.

During direct contact membrane distillation (MD) of 3.5 wt% salt solution, PVDF hollow fibers produced a water permeation flux of 41.5kgm−2h−1 (based on the external diameter of hollow fiber) and a NaCl rejection of 99.99% with a hot salt solution at 79.3 °C and cold distillate water at 17.5 °C.

The same study also found that reducing the reaction temperature (25 °C) and the concentration of K2HPO4 (0.02 M) resulted in larger ratio between the hollow core diameter to the external diameter of the microspheres, thought to be due to a more efficient packing of the fine HA particles.

The number after the E refers to the external diameter of the light bulb's thread in millimeters.

The diameter of the MWCNT is approximately determined as 50 nm, and the ratio of the internal diameter Di to the external diameter Do is around 1 10.

Specific criteria for vertebral artery hypoplasia or vertebral artery dissection were a large mismatch between the region of the TOF and the region of the true FISP because previous reports suggested that the criteria of increase in the external diameter of the artery and narrowing of the lumen offer high diagnostic accuracy [12, 13].

Previous reports suggested that the criteria of increase in the external diameter of the artery and narrowing of the lumen offer high diagnostic accuracy [12, 13].

Turning operations involve cutting excess metal, in the form of chips, from the external diameter of a workpiece and include turning straight or tapered cylindrical shapes, grooves, shoulders, and screw threads and facing flat surfaces on the ends of cylindrical parts.