Sentence examples for of strength failure from inspiring English sources

Dependency of strength failure criteria on ply angles may preclude using lamination parameters as design variables.

For catalyst tablets, low strength is related to increased risk of strength failure, and high strength would result in lower catalyst efficiency.

The performance of GFRP infill panels installed in RC-frame structures was evaluated based on the results from measures of strength, failure mode, initial lateral displacement, displacement ductility and hysteretic dissipated energy.

The results show that it is possible to reduce the probability of strength failure at low density, and that there exists much possibility to increase the reliability of strength.

On the other hand, the toughness values represent the area under the F Δ curve up to the state of strength failure.

The tabulated Δ max value defines the axial displacement value corresponding to a point located on the post-yield part of the actual curve wherein the axial load drops by 20%, indicating a state of strength failure.

A nonlinear finite element model was developed and verified against the test results in terms of strengths, failure modes and moment curvature curves.

In the case of channel connectors of high strength, failure occurs at the beam net section away from the face of the column, similar to beams with Reduced Beam Sections (RBS).

Key factors affecting shear performance of individual construction joint were investigated in terms of shear strength, failure mechanism, and displacement responses.

This scattering is due to brittle fracture nature of the strength failure, originating from the stress concentration around edges of existing micro-cracks, such as pores, defects, and discontinuations contained in tablets.

The detailed experimental analysis of beam strength, failure mode and cracking evolution was presented and compared with previous test results on beams reinforced by ordinary steel bears.