The main aims of this paper are (a) to establish a set of most suitable conditions such that diseases to be died out or to be persistent, and (b) to obtain the thresholds (based on the basic reproductive number) of the above two (SIS) epidemic models.
Based on the above studies, it was noted that intermittent irradiation by 4.3 4.5 mW/cm LED combined with intravenous administration of 60 mg/kg of rose bengal was the most suitable condition for the establishment of progressive thrombosis model.
Elemental analyses of the treated surfaces revealed a laser fluence of 0.25 J/cm2 to be the most suitable condition for the concentration of cobalt and the removal of surface contaminants, such as hydrocarbons and oxygen gas, without damaging the surface.
Thus, according to the findings of this work, the treatment at 500 MPa for 30 min was chosen as the most suitable condition of pressure/time to study the effect of the specific HHP treatment on the storage of green table olives.
Also, the effect of ZnO sol-gel process parameters on microstructure of sandwich paper are investigated and the most suitable condition for highest supercapacity performance is the solvent of 1-PrOH, stabilizer of TeA, sol concentration of 0.2 M, deposition speed of 30 mm min−1, and 10 deposited layers.
We found that a combination of 0.2 M sodium hydrogen phosphate (pH 2.3) and acetonitrile, in a ratio of 96 : 4 (v/v), was the most suitable condition for separating PQ and IS.
The most suitable condition for extraction of tea carbohydrate was found to be a single step extraction at extraction temperature 90 °C, extraction time 30 min, and solvent solid ratio 5 1.
The most suitable condition for extraction of oleanolic acid was found to be a single step extraction at extraction temperature 35 °C, extraction time 55 min, solvent solid ratio 55 1, mean particle size 0.5 mm and solvent composition 52.5% methanol in a methanol-ethyl acetate mixture.
The most suitable condition for production and application of CNT/water nanofluid has been proposed based on statistical analysis of the results.
A preliminary study of the main parameters involved in the preparation process of the carbon composites was carried out for the selection of the most suitable conditions.
