Sentence examples for of low feed from inspiring English sources

Under conditions of low feed concentration, complete separation (extract purity = 99.5%; raffinate purity = 98.4%) was achieved.

From the parametric analysis, it is revealed that, the combination of low feed rate, low depth of cut and low machining time with high cutting speed is beneficial for minimizing the machining force and surface roughness.

The combination of low feed rate, less machining time, and high cutting speed was necessary for minimizing the surface roughness.

Despite the possible detrimental effects of low feed intake, restrictive feeding after weaning has been used as a preventive measure against PWD.

However, the present study aimed to compare the ability of several inocula to ferment L. hyperborea under conditions of low feed rate (1% wet weight L. hyperborea day-1) and high turnover of the liquid phase (a complete change in leachate week-1) in order to minimise the effects of acidification and product feedback inhibition previously noted by others [ 7, 13].

The quality of fodder used in relief work is another problem: local hay is of low feeding value and the economics of transporting such a poor feed over long distances is dubious.

High hydrogen gas yield (6.13 mol/mol isooctane) was obtained at high reaction temperature of 637 °C, a low feed concentration of 9.9 wt% and a long residence time of 18 s in the presence of 2701.1 mmol/L hydrogen peroxide.

A low pyrolysis temperature of 440 °C with low feed rate increases the residence time in the combustion reactor yielding maximum oil.

The loose crystal deposition was attributed to the absence of hydraulic pressure, low feed temperature, high turbulence (Re = 5665.6) and short membrane retention time (21.6 s).

The latest study on hepatic transcriptome associated to feed efficiency was performed using taurine heifers and suggested that animals of high and low feed efficiency respond differently to hepatic proinflammatory stimulus [ 13].

The amplitude of the feed ingredient is visible in the higher range of the feed, at low feed rates dominate tool vibration with the wear of the cutting tool point.