Sentence examples for of circular pipe from inspiring English sources

Diameter of circular pipe.

In fracture through annulus, the diameter of circular pipe is calculated using the Crittendon's correlation which has been coded in the window.

At a given twist ratio, higher values of the friction factor and the Nusselt number were observed for smaller annulus parameters (ratio of cross section area of square twisted duct to cross section area of circular pipe).

Two sets of circular pipes of different orders of surface roughness are considered, and the pipe lengths are varied between 1 and 6 diameters.

The drop inlets are connected in a network of circular pipes and directed to a location where the runoff can either be absorbed into the ground or deposited in a nearby environmentally approved stream.

To this aim, a multifunctional heat exchanger/reactor geometry is investigated, consisting of a circular pipe where five arrays of four equally spaced trapezoidal vortex generators are inserted and inclined in a reversed position opposite to the flow direction with an angle of 45° with respect to the pipe wall.

The right boundary of the heat source moves from its original position to the end of the circular pipe in a few milliseconds, during which the inner wall is under forced convective heating and then the pipe is under natural cooling for a few seconds.

In this paper, transient heat transfer of a circular pipe subjected to an internal cyclic expanding heat source is investigated.

Using flexible printed circuit board technology to manufacture the sensor makes it possible to place the sensor at the inner surface of a circular pipe.

A tube bundle, a Laws' perforated plate and an etoile were located at the entrance of a smooth circular pipe of inner diameter, D= 26.6mm.

Then, a finite element study of a cracked circular pipe with FRP patching is shown and the corresponding reduction of the SIF is discussed.