Sentence examples for of better uniformity from inspiring English sources

In the pharmaceutical industry, batch blenders are used almost exclusively because the batch blending has historically provided tighter quality control in terms of better uniformity and batch integrity, as compared to continuous blending.

Compared with vertical NIL, RNIL has the advantages of producing better uniformity, requiring less force, and being able to repeat a mask continuously.

Compared with a three-axis accelerometer with multiple proof masses, a monolithic three-axis accelerometer is free from axis-alignment error and has advantages of smaller device size, better uniformity of the measurement signals in three sensing directions [7].

The atom beam sputtering (ABS) has several advantages over conventional rf sputtering, viz., 2″-diameter wide source of beam, substrate rotation, and less heating of the target material during deposition results in better uniformity of the films.

Briefly, the smaller average size and better uniformity of Au nanoparticles could be achieved through the faster heating rate.

There has been 2 3 fold increase of liquid deposition with better uniformity on the obscured as well as front target.

It is observed that the 2-nm-thick Al2O3 films show better uniformity of the formation voltages as well as the leakage currents.

The concave surface produces higher thermal efficiency and better uniformity of heat flux over the impingement surface as compared with the convex surface.

Moreover, compared with the level-dyeing measurements shown in Table 1, the better uniformity of the e-spun fiber diameter and the better level-dyeing property can be obtained.

In conclusion, we demonstrated that better uniformity of PEALD Al2O3 on 4′′ n-type silicon sample on the deviation of 0.7% was obtained when plasma power was changed to 45 W than 80 W.

A better uniformity of surface discharge may also be achieved by suitably adjusting the depths of ponding over the surface of the soil – regions close to the ditches be provided with zero or negligible depths of ponding and the ponding depths may be made to progressively increase with the increase in distance from the ditch faces.