Sentence examples for obtaining a plot of from inspiring English sources

In the southern city of Seville, Muslims are close to obtaining a plot of land for a mosque after years of bitter local resistance; in 2005 protesters dumped a pig's head on a plot originally chosen.

As a comparison, Gizachew et al. [28] obtained a plot level RMSE of 49% for AGB + BGB by using only NDVI from an OLI image acquired over Liwale on 31 July 2014.

We approximately determine curves of optimal profiles when varying the relative weight given to each performance measure and use these profiles to obtain a plot showing the variation of the ductility and the collapse factor as functions of the relative weights.

By obtaining a contour plot of the magnetic field distribution, we were able to localize the areas of activation over the uterus during a contraction.

The lethal concentration LC50 of the test samples after 24 h was obtained by a plot of percentage of the shrimps killed against the sample concentration (toxicant concentration) and the best fit line was obtained from the curve data by means of regression analysis.

The apparent activation energy (E) can be obtained from a plot of logarithm of heating rates.

This result clearly directs a decrease in the band gap energy (Eg) of NFTSs, which can be obtained from a plot of (αhν 1/2 versus photon energy (hν).

where kid (mg/g.min0.5) represents the intraparticle diffusion rate constant and its values are obtained from a plot of q vs. t0.5 (Figure 2).

The LC50 values of the plant extracts were obtained by a plot of percentage of the shrimp nauplii killed against the concentrations of the extracts and the best-fit line data by means of regression analysis.

The detector linear range and limit of detection (LOD) were determined using sodium anthraquinone-2-sulfonate. A linear regression coefficient (R) of 0.9996 was obtained for a plot of log peak area versus log concentration over the range of 3.2 μM to 6.5 mM, and the LOD (S/N = 3) was found to be 7.8 fmol (0.13 μM).

The lethal concentration LC50 of the test samples after 24 h was obtained by a plot of percentage of the dead nauplii against the logarithm of the sample concentration (toxicant concentration) and the best-fit line was obtained from the curve data by means of regression analysis (Fig. 1).