Sentence examples for obtaining a higher efficiency from inspiring English sources
Obtaining a higher efficiency of electricity generation and exceeding the 50% net efficiency barrier, apart from the increase in the steam parameters, requires an optimisation of the thermodynamic cycle, together with the modernisation of the flow system of steam, condensers, regenerative water heaters.
The number of PV modules required in the string is determined to meet the voltage requirements of the grid-connected inverter, this way the PV modules are connected directly to the DC link of the inverter in a centralized topology and the high step-up power converter of the conventional systems is avoided, obtaining a higher efficiency.
The catalyst was characterized for the oxygen reduction reaction (ORR) in a rotating ring disk electrode (RRDE) configuration, obtaining a high efficiency of conversion to H2O.
With increasing D/P ratio, the conversion efficiency increases first and then decreases, obtaining a highest efficiency of 18% at a D/P ratio of 0.6 and NW diameter of 340 nm.
The goal is to produce a grid current with a low THD value and to obtain a higher efficiency.
In order to further obtain a higher efficiency, multi-junction solar cells with different materials have been designed and fabricated [2].
Based on that, a desirable feeding strategy that could obtain a higher efficiency of power dissipation was determined by means of the subroutine VUAMP in ABAQUS.
Although the Au NR@SiO2 NPs also have the function to target the tumor site via the enhanced permeability and retention (EPR) effect [43, 44], the simple nanoparticles cannot obtain a higher efficiency of targeting than NP-CIK cell complex peritumor injection.
A process flow diagram is proposed in order to obtain a high efficiency and to avoid the use of any external source of energy.
However, the valence band offset between Si and Ge is quite large, and the design of the doping profile is important to obtain a high efficiency solar cell.
To obtain a high efficiency it is important that the heating systems in the buildings are operated with both low supply and return temperatures.
