Sentence examples for obtain a strength from inspiring English sources

Vlasov's curved beam theory is used to derive closed form expressions for the variation of the stress resultants around the circumference to obtain a strength design criterion for the stiffener.

These force and displacement boundary conditions are then applied to the intermediate ring stiffener to derive closed form expressions for the variation of the stress resultants around the circumference to obtain a strength design criterion for the stiffener.

Peak strength with the arm abducted to 90°, the elbow fully extended, and the forearm maximally pronated, was measured on both sides using a fixed-spring balance (Macro 35 kg, Pesola AG, Baar, Switzerland) to obtain a strength value for determination of the Constant-Murley shoulder score [ 20- 22].

The concrete matrix for all SFRC specimens is mixed to obtain a compressive strength of 35 MPa.

The experimental data is then interpreted using a relevant code to obtain a design strength value according to the required percentile and confidence.

The results indicate that it is possible to manufacture and engineer these types of composite beams to obtain a specified strength without using any specialized equipment, heat, or pressure, thus, producing an environmentally conscious biocomposite material.

The concept of phase reversion involving severe cold deformation of austenite at room temperature to generate strain-induced martensite, followed by annealing when martensite reverts to austenite via a diffusional mechanism, was used to obtain a "high strength, high ductility" combination in nanograined (NG) austenitic stainless steel.

Altogether, the outstanding properties of the material combined with the energy-efficient manufacturing process for Fe84.3Cr4.3Mo4.6V2.2C4.6 open up a new possibility to obtain a high-strength and simultaneously adequately ductile alloy for advanced tool design.

The fatigue predictions and comparisons with the experiments are reported in an accuracy chart, showing that a small radius notched specimen is recommended to determine the critical distance and thus obtain an accurate strength assessment of a blunter specimen.

The use of UHMWPE resins with low molecular weight or the application of a remelting treatment could contribute to obtain a better impact strength behavior.

The optimized diameter (50 mm) of loading head and penetration rate (2.25 mm/min) were determined for SPT to obtain a reliable skeleton strength.